Page Top Enquiry Email Contact

FMS 3D Printer

FMS Printing uses selective CO₂ laser sintering technology which sinters plastic powders(ceramic or metal powders with binding agent) into solid cross-sections layer by layer until a three-dimensional part is built. Before making the parts, need to fill the build chamber with nitrogen and rise the chamber temperature. When the temperature is ready, a computer controlled CO₂ laser selectively fuses powdered materials by tracing cross-sections of the part on the surface of a powder bed and then a new coat of materiel is applied for the new layer. The working platform of the powder bed will go one layer down and then the roller will pave a new layer of the powder and the laser will selectively sintering the cross-sections of the parts. Repeat the process until the parts completed

  • CO₂ Laser
  • Fast galvanometer
  • iSLS Control System

Online consulting

KEY FEATURES

High speed · High precision · High quality

ZRapid FMS 3D Printers
  • Parts have fine details and smooth surface
  • Easy preparation, no need support for the parts during the process
  • Part with high temperature and corrosion resistance property
  • Parts can be printed within minutes to hours according to the size and complexity
  • Directly produce functional complex geometric assembly parts
  • Widely chosen materials meets your requirements for color, tensile or high temperature resistance

Product Specifications

  • iFMS400 Specifications

    LASER SYSTEM

    TypeCO₂Laser

    Wavelength10.6μm

    Power60W

    RECOATING SYSTEM

    Typebi-directional roller paving

    Normal Build0.15mm

    Quick Build0.15~0.20mm

    Precision Build0.10~0.15mm

    OPTICAL & SCANNING

    Beam (diameter@1/e2)0.2~0.5mm

    Scanning GalvanometerHigh Speed Scanning Galvanometer

    Parts Scanning Speed6.0m/s (recommended)

    Blank Jumping Speed10.0m/s (recommended)

    TEMPERATURE CONTROL

    Typefar-infrared heating

    DetectionReal time control and compensation

    Controlintelligent control

    BUILD VAT

    VolumeApprox. 65L

    Size 400mm(X) × 400mm(Y) × 400mm(Z)

    Max Weight50kg

    SOFTWARE

    NetworkEthernet, TCP/IP, IEEE802.3

    Control SoftwareiSLS(Miracle SLS)

    Date Preparation Software3dMagic

    Data InterfaceCLI file, SLC file, STL file

    INSTALLATION CONDITION

    Power200~240VAC 50/60Hz, single phase, 15Amps

    Ambient Temperature20-26ºC

    Relative HumidityLess than 40%, non-condesing

    Size2.50m(W)×1.35m(D)×2.20m(H)(Operating computer is not included)

    WeightApprox. 2500kg

    WARRANTY

    Laser5000 hours or 12 months (whichever comes first)

    Main Machine24 months from installation date